Description

The DeLaMare Science & Engineering Library also offers vinyl cutting services on our 24" US Cutter MH Series vinyl cutter. We currently offer vinyl in 24" width in a variety of colors at $1.25 per foot of length. See the chart below for more information regarding cutter specifications and materials that can be cut!

Note: If you would like assistance from a Maker Wrangler while using the laser cutter, please book them for the same time.

MH Series Vinyl Cutter Specifications

• Maximum Cut Width: 24"

• Maximum Cut Length: 12'

• What it Cuts: Standard Vinyl, Heat Transfer Vinyl, Paper, Craft Paper, Card Stock, Paint Mask

• What it Cannot Cut: Tint, Laminate, Sand Blast Resist, Low-Intensity Reflective, High-Intensity Reflective, Un-backed or un-linered media without the use of a carrier sheet

• Speed: 39 in/s

• Force: 350 g

Making a Reservation:

If you are using a piece of equipment, you will need to reserve a Maker Wrangler and that piece of equipment for the same time frame.

 How to book a Maker Wrangler for the same time frame as your equipment reservation: 

1. Go back to the Makerspace reservation page. 

2. Find the Maker Wrangler space and select the time frame. 

3. Find the equipment you would like to use, and select the same time frame. You will see that both the Maker Wrangler and the equipment have grey blocks for the time frame you chose. Here is an example of what that will look like:

4. Scroll down and adjust the times as needed. 

5. Select "Submit Times".